Bry-Air® Seed Dryers, also known as Tray Dryers dry and preserve seeds, food products, spices, etc., without affecting their quality.
For instance, seeds need to be preserved for short term and long term for future use, replanting, as well as research. Seed ageing and death occurs over the time.
However, it is possible to ensure long survival of seeds by controlling temperature and relative humidity. Reduction in temperature and moisture content ensures increased seed life.
Seeds can be preserved for long period by lowering their moisture content to around 5%. This is achieved by drying the seeds. Conventionally, seeds are dried at elevated temperatures which destroy their germination potential.
Bry-Air Seed Dryers, based on the state-of-the-art Desiccant Dehumidification Drying Technology, dry the seeds to the required level in approximately eight (8) hours without affecting their quality.
Seeds dried prior to storage can regain moisture and suffer damage if not stored under controlled conditions. Dried seeds can be preserved for years in dehumidified stores without loss of germination potential.
Bry-Air Dehumidification based Seed Dryers and Storage Systems are being used extensively world over by commercial and plant breeding organisations including the Food and Agriculture Organization (FAO).
Advantages of Tray Dryers
High Efficiency and Reliability
- A totally self-contained unit
- Rotor media has high performance metal silicates synthesized in situ
- Rotor incorporates robust internal structure with stainless steel perimeter flange for industrial quality and durability
- Rotor perimeter flange extends media and seal life
- Edge hard face coating on rotor ensures long life and good sealing for media and seals
- Rotor is non-flammable with organics <2%
- Water-cooled inter cooler
Necessary Control and Safety
- Differential air pressure switch for proving react air flow
- High temperature safety thermostat cut-out
- Reactivation cool down safety device
- Electrical interlocking of fan motors, heaters, and rotor drive
- Unique PTFE bonded Silicon bulb seal design; minimized air leakage
Easy to Operate
- Suitable for continued operation
- Power on, heater on, and fault status indications
- Independent blower and motor for each airflow (Process and Reactivation)
- Volume control damper for P&R air flow
Easy to Install
- Skid-based frame with Castor Wheel
- Easy to handle
- Small footprint; low volume/weight per CMH
Easy to Maintain
- Quick and easy to service
- Rotor is water washable
Options
- Humidity control through humidistat On/Off
- Stainless steel construction
Bry-Air Tray Dryer consists of a chamber with trays for keeping the products to be dried and a Desiccant Dehumidifier which continuously feeds dry air to the chamber. This unique air distribution pattern optimises drying capacity and time.
Available in three models, Bry-Air Tray Dryers’ drying capacities range from 180 KG to 540 KG per 8 hrs.
MODELS
|
PROCESS AIR FLOW
CMH
|
PRPCESS
ESP
(P.A.)
|
PROCESS
MOTOR
(KW)
|
REACT
AIR FLOW
CMH
|
REACT
ESP
(P.A.)
|
REACT
MOTOR
(KW)
|
REACT
HEATER
(KW)
|
SEED
DRYING
KG/Hr
|
TRY SIZE / QTY.
M3
|
DIMENSION
|
POWER*
REQD.
|
APPROX.
WEIGHT
Kg.
|
A
MM
|
B
MM
|
C
MM
|
FSD-600
|
600
|
750
|
1.1
|
200
|
750
|
0.37
|
7.2
|
180
|
0.03/10
|
1700
|
2225
|
1200
|
415 /3/ 50
|
465
|
FSD-1200
|
1200
|
750
|
1.1
|
400
|
750
|
0.75
|
14.4
|
360
|
0.03/20
|
2350
|
2225
|
1200
|
415 /3/ 50
|
630
|
FSD-1800
|
1800
|
850
|
1.5
|
600
|
750
|
0.76
|
21.6
|
540
|
0.03/30
|
3000
|
2225
|
1200
|
415 /3/ 50
|
745
|
** Note: Other voltage available are 200/220/240/380/440/460 VAC, 3Ph, 50/60 Hz