“We are very satisfied with all 7 nos. Bry-Air Dehumidifying Dryers installed in different machines of Windsor, SUMO, Battenfed, and Nigata. We have been using these dryers for five years.

We appreciate your team for solving our moisture problem and for providing us with the good and prompt after sales and service.”

NIPA International (P) Ltd.

Ajay Bhanot Manager Operations

“Our experience in the past with lots of chilling plant manufacturers was not good. Then we tried your chilling plant and found them one of the best in the lot.

We feel that recommending your company’s chilling plant is a correct decision for our organisation. Your services and customer relations are good. We wish all success to your organisation.”

Neptune Plastic & Metal Industries, Kolkata

G.K. Bhatia Partner

“We are satisfied with the performance of M/s Bry-Air’s Air Purification EcoScrub Units installed in our TG-3 Control Room. M/s Bry-Air’s team has successfully commissioned the units and changed the Control Room conditions to achieve “G1” condition.

We have also replaced chemical media in both units recently and the equipment is found to be working satisfactorily.”

Grasim Industries Limited (Unit: Harihar Polyfibers)

A.V. Shridatta General Manager (Materials)

“Bry-Air plastics auxiliary equipment is working extremely well with us. We are satisfied with all the installed equipment. We have been using these equipment for more than 8 years.

We appreciate your team for solving our problems and for providing us with good and prompt after sales services from your Dubai office.”

Plycon Gulf Limited, UAE

J. H. Oja Operation Manager

“We are presently using fourteen (14) Bry-Air BPD-50 Dehumidifying Plastic Dryer complete set with hopper, auto loader, and cyclone dust separator. We are very satisfied with the performance of the Bry-Air dryers and we believe with its unique four-bedded drying technology, it is able to meet all our stringent quality requirements and delivers a consistent -40°C dew point”.

Molex (Malaysia) Sdn. Bhd., Malaysia

E. Maran Engineering Manager, Moulding

“We are very satisfied with Bry-Air Dehumidifying Dryers installed on different international brands of Injection Moulding machines. We have been using these dryers for 8 years. Bry-Air Dehumidifying dryers meet all our requirements and delivers a consistent dew point of -40° C.

I strongly believe that Bry-Air’s unique 4-bedded advanced technology has helped in achieving a consistent dew point.”

Mayor International Limited

Suveer Sheopuri Sr. Manager-Production

Bry-Air supplied Hot Dryer & Auto Loader to my fellow peers in the industry. Using Bry-Air hot air dryers and auto loaders at our Shapar (Veraval) facility since last 6 years, we have not faced any problem till date. Bry-Air is a professional, well-managed firm and they meet and exceed customer expectations. After using the BryAir hot air dryer, we are getting proper drying and our end product quality has also improved.

Ultracab (India) Ltd.

Pankaj Shingala Director

Bry-Air (India) Pvt. Ltd., now Bry-Air (Asia) Pvt. Ltd., coupled with M/s. Klenzaids, Bombay, supplied two Engineered Dehumidifiers (1000 CFM), which are working well.

The conditions are maintained at 20% RH at 72xF. After sales & services of Arctic India Sales, now Bry-Air (Asia) Pvt. Ltd., Hyderabad is excellent. The units are covered under Annual Maintenance Contract.

Dr. Reddy’s Laboratories Ltd.

C.V.S.N. Raju Dy. General Manager

We got Bry-Air Dehumidifier Model BA-0.5A installed in our facility and it is working well.

We wanted to have an Auto Control System for the dehumidifier to maintain 65±2% RH inside the paper-conditioning chamber.

Emami Paper Mills Ltd.

A.K. Sahu Incharge- LAB/O.C.